◆原著論文

◆国際会議

(1).M.Polcarova and Y.Saito: "Observation of Growth Striation in Fe-Si Alloy Single Crystal by X-ray Topograph", Fifth Conference of Czechoslovak Physisists, 1977, p589-591, Kosice , Czechoslovakia , [Czechoslovak Academy of Sciences, Prague ]

(2).Y.Saito, N.Koshizuka, C.Shiga, T.Sekine, T.Yoshizato and T.Enami: "Advanced Controlled Rolling Techniques for Manufacture of High Strength, High Toughness Steel Plates at 5500 mm Plate Mill, Proc. of 1st International Conference on Steel Rolling, 1980, Tokyo, [ISIJ]

(3).M.Kimura, Y.Saito, T.Enami and T.Tanaka: "As-rolled, Finer Grained Steel Plate with High Strength and Toughness for Shipbuilding, Seminar on the Use of Steel in Shipbuilding, 1980, Katowice, Poland, [Economic Commission for Europe]

(4).C.Shiga, K.Amano, T.Hatomura, Y.Saito, K.Hirose and T.Choji: "Ferrite-Fine Bainite Steel Line Pipe of X70 and X80 grades for Low Temperatute Service, Proc. of International Conference on Steels for Line Pipe and Pipeline Fittings, 1981, p.127-135, London, [The Metals Society]

(5).T.Tanaka, T.Enami, M.Kimura, Y.Saito and T.Hotomura: "Formation Mechanism of Mixed Austenite Grain Structure Accompanying Controlled Rolling of Niobium-bearing Steel", Thermomechanical Processing of Microalloyed Austenite, 1981, p.195-215, [AIME]

(6).Y.Saito, M.Kimura, M.Tanaka, T.Sekine, K.Tsubota and T.Tanaka: "Controlling Microstructure and Mechanical Properties Utilizing Deformation Resistance in Plate Rolling", Kawasaki Steel Technical Report, No.9(1984), p12-21

(7).Y.Saito, M.Tanaka, T.Sekine and H.Nishizaki: "Mechanical Properties Control in Controlled Rolling and Accelerated Cooling of HSLA Steels, Proc. of International Conference on High Strength Low Alloy Steels, 1984, p.28-32, Wollongong, Australia, [University of Wollongong]

(8).S.Tezuka, M.Kimura, Y.Saito and T.Sekine: "Uniform Cooling Control Techniques in Multi purpose Accelerated Cooling System for Steel Plate", Proc. of Fourth IFAC Symposium on Control of Distributed Parameter System, 1986, Los angels, [IFAC]

(9).Y.Saito, Y.Nakano, S.Ueda and K.Kobayashi: "Optimization of Chemistry and Manufacturing Process for Offshore Structural Steel Plate for Large Heat Input Welding", Proc. of International Symposium on Welding Metallurgy of Structural Steels, 1987, p.615-629, Denver, USA, [AIME]

(10). S.Yoshimura, K.Amano, T.Uemura, H.Nishizaki, Y.Saito and M.Sekizawa: "Development and Manufacture of Low PCM High Toughness Steel Plates for API5L-X60 UO Pipes", Kawasaki Steel Technical Report, 17(1987), p.48-55

(11). Y.Nakano, Y.Saito, J.Kudoh, S.Ueda, E.Kobayashi, S.Deshimaru and T.Ogawa: "A 460 MPa Yield Strength Steel Plate Produced by TMCP for Arctic Use", Proc. of International Symposium on Accelerated Cooling, 1987, Winnipeg , Canada , [The Metallurgical Society of CIM] p.609-616

(12).Y.Saito, C.Shiga and T.Enami: "Computer Simulation of Carbonitride Precipitation in High Strength Low Alloy(HSLA) Steel", Proc. of International Conference on Physical Metallurgy of Thermomechanical Treatment of Steels and Other Alloys, 1988, p.753-760, [ISIJ]

(13).A.Tosaka, Y.Saito, M.Saeki and K.Hashiguchi: "Modeling of Mechanical Properties Estimation for Hot Rooled Nb Bearing Steel, Proc. of Microstructure and Properties of HSLA Steels, 1988, p.379-397, Pittsburgh, USA, [AIME]

(14).C.Shiga and Y.Saito: "Toughness Improvement in HAZ of HSLA Steels By TMCP in Japan ", Proc. of First United State-Japan Symposium on Advances in Welding Metallurgy, 1990, p.177-205, San Francisco , USA , [American Welding Society]

(15).A.Matsuzaki, Y.Saito, O.Watanabe and C.Shiga: " Improvement of Mechanical Properties of Modified 9Cr-1Mo Steel by Thermomechanical Control Process, New Alloys for Pressure Vessels and Piping, 1990, p.89-95, [ASME]

(16).Y.Saito and M.Enomoto: "Monte Carlo Simulation of Microstructural Evolution in Steel", Computer Innovation of New Materials, 1991, p.809-814, [Elsevier Science Publishers, North-Holland]

(17).Y.Saito, A.Matsuzaki and C.Shiga: "Computer Simulation of Microstructural Changes in Thermomechanical Processing of 18Cr-8Ni and 9Cr-1Mo-V-Nb Steels", Computer Innovation of New Materials, 1991, p.819-822, [Elsevier Science Publishers, North-Holland]

(18).Y.Saito: "Mechanism of Temper Embrittlement in 2.25Cr-1Mo Steel", Proc. of 6th Czechoslovak-Japan Joint Symposium, 1991, p.103-116, Ostrava , Czechoslovakia , [The Society for New Materials and Technologies, Prague ]

(19).Y.Saito, A.Matsuzaki and C.Shiga: "Computer Simulation of Microstructural Evolution in Cr-Mo Steels during Heat Treatment", Proc. of the 8th International Conference on Heat Treatment of Materials, 1992, p.573-576, Kyoto , [The International Federation of Heat Treatment and Surface Engineering 3(1993)3,

(20).Y.Saito: "Modeling of Microstructural Evolution in Thermomechanical Processing of High Strength Low Alloy Steel Plates", Proc. of International Conference on Computer-assisted Materials Design and Process Simualtion, 1993, p.147-152, Tokyo , [ISIJ]

(21). T.Nagai, K.Fuchizaki, K.Kawasaki, M.Enomoto and Y.Saito: "Grain Growth with Anisotropic Grain Boundary Energy: Vertex Model Simulation", Proc. of International Conference on Computer-assisted Materials Design and Process Simualtion, 1993, p.349-354, Tokyo , [ISIJ]

(22). M.Enomoto, Y.Saito, K.Fuchizaki, T.Nagai and K.Kawasaki: "Evolution of 2-D Polycrystalline Grain Structures Simulated by Vertex Model", Proc. of International Conference on Computer-assisted Materials Design and Process Simulation, 1993, p.380-385, Tokyo , [ISIJ]

(23).M.Kimura, Y.Miyata, Y.Saito and Y.Nakano: "Development of Steel Plate and Welding Material with Superior Preferential Corrosion Resistance in Welded Joint", Proc. of ISOPE, 1994, Osaka

(24).M.Kimura, Y.Saito and Y.Nakano: "Effects of Alloying Elements on Corrosion Resistance of High Strength Linepipe Steel in Wet CO2 Environment", Corrosion '94, [NACE]

(25). Y.Saito, H.Harada and H.K.D.H. Bhadeshia: "Monte Carlo Simulation of Microstructural Evolutions in Metals", Proc. of Japan-Central Europe Joint Workshop on Advanced Computing in Engineering, Ed. by M. Akiyama and M.Kleiber, 1994, p.117-122, [Institute of Fundamental Technological Research Polish Academy of Sciences , Warsaw ]

(26). Y.Saito, H.Murakami and H.Harada, “ Modelling of Microstructure in Ni-base Superalloys ” , Proc. of Modelling and Simulation for Materails, ed. by S.Nishijima and H.Onodera, 1996, p.160-165, [National Research Institute for Metals, Tsukuba]

(27). H.Murakami, Y.Saito, M.Enomoto and H.Harada, “ Atomistic Investigation of Ni-base superalloys using Cluster Variation Method, Monte Carlo Simulation and Atom Probe Microanalysis ” , Proc. of Modelling and Simulation for Materails, ed. by S.Nishijima and H.Onodera, 1996, p.256-261, [National Research Institute for Metals, Tsukuba]

(28) M.Murakami, Y.Saito and H.Harada: Determination of atomistic structure of Ni-base single crystal superalloys using Monte Carlo simulations and atom probe analyses, Superalloys 1996, (1996), p.249-257, TMS-AIME, Warrendale PA,USA

(29)Y.Saito, H.Murakami and H. Harada: An application of Monte Canlo Method to Materials Design of Ni-base superalloys, Proc. Of Thermo mechanical Processing of steels & Other Alloys,(1997) p.1745-1752, TMS-AIME

(30) Y.Saoto: Computer Simulation of Microstructural Evolutions in Structural Steels During Thermomechanical Control Process, Proc. of 7th Internl. Conf. on Steel Rolling, (1998), p.485-494, ISIJ

(31) Y.Saito, S. Tanabe, E.Onuma, H.Murakami and H.Harada: Modelling of Microstructural Evolutions in Ni-base Superalloys under Stress, Solid to Solid Phase Transforamtion1999, (1999), JIM

(32) Y.Saito, M.Honjo and Y.Suwa: Computer Simulation Models of Grain Growth, Recrytallizaition and Related Phenomena 1999, (1999), JIM

(33) Y.Saito and Y.Suwa: Computer Simulation of Microstructural Evolutions in Materials by Models Based on Monte Calro and Phase Field Methods, 2000, The Metallurgical Society of CIM, 2000

◆総説

◆著書

◆研究報告

To Top